£230.00 / €287.50

The versatile Beagle I2C/SPI/MDIO Protocol Analyzer is the ideal tool for the embedded engineer who is developing an I2C, SPI, or MDIO based product.
find out more

£195.00 / €243.75

Connect your Windows or Linux PC to I2C and SPI bus through USB with the Aardvark I2C/SPI Host Adapter. Multi-master, slave, and GPIO are featured in this versatile development and testing tool.

find out more

£850.00 / €1,062.50

The Beagle™ USB 480 Protocol Analyzer is a low cost, non-intrusive High-Speed USB 2.0 bus monitor which comes complete with software and royalty-free API.

The Beagle analyzer is capable of capturing, displaying and filtering high-speed USB bus-states and traffic in real-time with timing at 16.7 ns resolution. Thanks to an on-board 64 MB buffer, sustained bursts of 480 Mbps traffic can be captured with no loss of data.

find out more

£152.00 / €190.00

The Wiggler is a low cost interface used in the design, debug and programming of microprocessor and microcontroller-based embedded systems. One side of the Wiggler interfaces to the parallel port of a host PC and the other side connects to an OCD (on-Chip Debug) port on the target system. As with all Macraigor interface devices, the Wiggler can simultaneously debug up to 255 devices on a single scan chain.


find out more

£350.00 / €437.50

The Wave Generator Xpress is high speed USB 2.0 PC-based digital pattern generator or arbitrary digital waveform generator. It generates arbitrary digital stimuli on up to 16 bits, 100 MByte depth per run at up to 50 MSample/s.

This USB pattern generator features 6 digital control lines used to handle output / input clock signals and generate repetitive sequences. It is typically used to generate arbitrary digital data to stimulate your board or chip prototype, exercise custom digital interfaces and produce arbitrary digital sample streams to your system under test. Wave Generator Xpress is a convenient, robust and compact personal tool for a wide variety of test and debug tasks on electronic systems.

The Wave Generator Xpress is controlled with the 8PI Control Panel Software, freely licensed with the ADWG (Arbitrary Digital Waveform Generator) mode of operation. With its multiple graphical and programming (TCL/tk and C/C++) interfaces, you have many flexible options to generate stimuli, from binary or text file to whole algorithms programmed in Tcl/tk, C/C++, Visual Basic and many others.
find out more

£315.00 / €393.75

The Leaper-48 is a compact professional 48 pin universal programmer with a USB interface to the host PC. Supports EPROMs, EEPROMs, FLASH EPROMs, serial EEPROMs, Microcontrollers, GALs and PALCEs, PLD's and DSP's.
find out more